Skip to Content

The right robot for the healthcare sector



The right robot for the healthcare sector

Homepage > Areas of Application > Healthcare

Service robotics for healthcare facilities

Selecting and deploying appropriate robots in healthcare

Recurring floor cleaning, internal transport routes and clearly defined deliveries can be supported by robots if the task, building, hygiene requirements and operational procedures match.

On this page you will find the right entry point for medical practices, medical centers, rehabilitation facilities, nursing homes or clinics.

The focus is on service, cleaning, and transport robots for non-medical tasks. Surgical robotics, diagnostics, therapy, and human care are not part of this offering.

Task before model

What task should the robot perform?

A clear primary task prevents very different processes from being mixed in one technical solution.

Describe the task

Clean floor surfaces

Depending on the model, vacuuming, sweeping, wiping or scrubbing may be possible.

01
  • usable area and floor coverings
  • Narrow passages and turning areas
  • Type of pollution
  • manually remaining areas
  • Charging, water and emptying concept
  • Operating hours and public access
  • Machine, floor and cleaning agent

Transporting material

Transport robots are suitable for defined goods, fixed start and end points, and recurring journeys.

02
  • Type, weight and dimensions
  • Storage, compartment or load carrier
  • Loading and unloading
  • Access and transfer rules
  • Doors, elevators and airlocks
  • Return route and disruptions

Disinfection should be evaluated separately.

Cleaning and disinfection are not the same thing. The device, intended use, cleaning agents, application parameters, and hygiene concept must all be compatible.

03
An operational report only documents the completed cleaning cycle. It alone is not proof of cleaning quality or hygienic effectiveness.
Disinfection procedures for medical practices and clinics

Document operational processes

Depending on the model, time, route, area, status, and interruptions can be recorded. It is essential to clarify beforehand which data is needed, who has access, and how long it will be stored.

04

Potential benefits

Robotics creates capacity in clearly defined processes.

The specific benefits depend on the location. Therefore, we do not promise any general time, quality, or cost savings before the audit.
01
Schedule recurring tasks into fixed time slots
02
Clearly defined transport routes reduce
03
Suitable surfaces can be processed reproducibly.
04
Making interruptions and interventions visible
05
Making decisions with real pilot data
06
Shift work capacity from paths and areas back to human tasks

Suitability check

These conditions determine the deployment

The site assessment considers processes, buildings, hygiene, and responsibilities. A suitable data sheet alone is not enough.

01Task and process

A clearly defined area or route, known frequency, defined handover points, and rules for exceptions.

02Buildings

Sufficient passage and turning widths, suitable floors, regulated doors and elevators, and defined permitted and excluded zones.

03Supply and technology

Charging and parking space, electricity and, depending on the model, network, water, drainage and building interfaces.

04Hygiene and Sicherheit

Coordination with cleaning and hygiene concept, approval of procedures and resources, and rules for special contaminations.

05Organization

Designated responsible parties, trained teams, daily support, escalation process and manual replacement process.

06data

Clarification of map, sensor and operational data, access rights, remote access, storage location and retention.

preselection

Overview of robot types

The classification shows possible tasks. The specific model will only follow after the area, route, building and operation have been examined.

From task to robot type

Don't choose a solution based on appearance or individual features. What matters is which process needs to be reliably supported.

View all models
Compact cleaning robotSmaller or furnished floor areas
Combination or scrubber-drying robotsContiguous medium and large areas
Delivery robot with shelves or compartmentsSmaller goods on fixed routes
Platform or underride robotsWagons, containers and defined heavy loads
Specific disinfection systemExplicitly approved disinfection procedures

Preface

From operational deployment to resilient pilot

The pilot will be tested on the intended task and under normal operating conditions.

01

Define the task

Specify the area, route or transport, and desired result.

02

Check location

Record routes, floors, doors, elevators, connections and operating hours.

03

Specify robot type

Compare models, accessories, handovers and interfaces.

04

Preparing operations

Define zones, responsibilities, briefing, and replacement process.

05

Real-world testing

Test at scheduled times with typical obstacles and normal traffic.

06

Evaluate

Compare journeys, areas, interventions, results, and team feedback.

Proof of practical experience

Measurable pilot data instead of blanket promises

No customer results will be fabricated without approved, verified healthcare references. A pilot project will provide the data basis for decision-making at your own location.

AbschlussquotePlanned and completed journeys or areas
InterruptionsBlockages, interruptions and causes
Manual workPreparation, interventions and remaining effort
Team feedbackOperation, acceptance and responsibilities

clear boundaries

What this robotics does not do

Service robots support defined non-medical tasks. Medical responsibility and human care remain with qualified personnel.

No diagnosis, therapy, or medical decision
No human care
No lifting or transporting people
Not a complete replacement for manual cleaning
Do not automatically equate cleaning with disinfection.
No floor changes without a suitable elevator solution
No hygiene benefits can be derived from a journey log.
Operations and failures require human responsibility.

Frequently asked questions

Answers before the deployment test

The most important questions concern intended use, hygiene, operating hours, malfunctions and costs.

What is the difference between service robots and medical robots?

Service robots perform non-medical tasks such as cleaning and transport. Medical robots are developed for diagnosis, therapy, rehabilitation, or surgical procedures and have a different purpose.

Is robotics also suitable for small practices?

It depends on the usable area, furnishings, and frequency of the task. The overall size alone is not the deciding factor.

Can robots meet hygiene standards?

They can be part of an approved process. Procedures, resources, equipment, and area of ​​application must be checked against the manufacturer's instructions and the hygiene concept.

Can the robot work during opening hours?

That may be possible. However, its use must be tested in real-world passenger and material traffic situations.

What happens in the event of a malfunction?

Before regular operation begins, it is determined who receives a notification, who is allowed to intervene, and how the task is continued manually.

How much does the solution cost?

This depends on the robot type, area or route, accessories, building integration, and support. A reliable figure will follow after the specific deployment case has been assessed.

Next Step

Start with a specific use case.

We are examining which type of robot is fundamentally suitable and what a sensibly defined pilot role could look like.

  • type of facility
  • Desired task
  • area or route
  • Floors, doors and elevators
  • Operating times
  • Hygiene and documentation
SEBOTICSYour integrator for service robots, cleaning robots and transport robots.

Our robots make work more pleasant for you and your team. Perhaps this sounds familiar:

Free initial consultation Call 041 500 75 52